Emergency Light Design for Genset Room at Bogor Academy of Technology

Abstract

The purpose of the study was to determine the design of emergency light lamps in the design of 1-phase generator installations at the Bogor Academy of Technology. To find out how to test the emergency light tool on the design of the 1-phase generator installation of the Bogor Academy of Technology. To design an emergency light in a generator room there are several things that need to be considered, including: Determining the location / place of installation of emergency light generator components that are appropriate, Performing installation / wirring emergency light generator room in accordance with PUIL standards. The results showed that the electric current will choose to flow through the LDR and not through the 12 Kohm Resistor connected to the base of the transistor, there is no current flowing in the relay, the relay does not work so it cannot pull the switch that will connect the AC electric current (PLN) to the lamp. If the LDR or light sensor is not exposed to light, the lights will turn on automatically. and battery charging lasts for 4 hours and the LED can light up for 5 - 7 hours with white light.